Metallbearbeitungsmaschinen gebraucht kaufen

The machine is in good technical condition, under power, after agreement is possible to test it.

Details:
Arbeitsflaeche: 1270 x 2032 mm
Presskraft: 33 t

The machine is complete overhauled and modernized. The machine has a modern headstock 3000 rev./minute and a new X bed, slides and table – headstock, X bed, slides and table are made by Fermat.

Details:
Presskraft: 500 t
Die Abmessungen des Desktop: 3000 x 1800 mm
Stößelhub: 850 mm
Hubanzahl: 9 - 18 /min
Durchgang zwischen den Ständern: 3100 ...

The machine is after complete overhaul, garantee 1 year.

Details:
Steuerung Heidenhain : TNC 530
Arbeitsspindeldurchmesser: 100 mm
X Weg: 1250 mm
Y Weg: 1100 ...

The machine is in good technical condition, under power, after agreement is possible to test it.
In 2019, the moving screws on the X and Y axes were replaced.

Details:

The machine is in good technical condition. Possible to test it under voltage.

Details:
Steuerung Tesla : NS 642 C
Max. Werkstückdurchmesser: 800 mm

Linear roller guide in all axes.
Articulated chip conveyor.
Heidenhain direct absolute metering in all axes.
Fully covering the machine.
19 color touch monitor
GEN3 ...

Machine under the power.
Full covering guards
4 steady rests
6 grinding wheel flanges
Cooling tank with paper filter
2 diamond holders for darius and cone grinding

Machine in good condition. Under power, possibility to try.

Details:
Max. Schnittlänge: 2500 mm
Max. Blechdicke: 4 mm
Antrieb einer Schere:

The machine is in a good technical condition. Under power. It can be tested.

Details:
Max. Werkstücklänge: 3000 mm
Max. Werkstückbreite: 1500 mm
Max. Blechdicke: 12 ...

Good technical condition, can be tested. Price included desk mounting plates 4x (1,5x1,0 m)

Details:
Arbeitsspindeldurchmesser: 125 mm
X Weg: 2500 mm

The machine is in a good technical condition. Under power. It can be tested.

Details:
Steuerung Cybelec: DNC 60
Max. Schnittlänge: 2600 mm
Max. Blechdicke: 8 mm

The machine is in a good technical condition. Under power.

Details:
Arbeitsspindeldurchmesser: 200 mm
X Weg: 5000 mm
Y Weg: 4000 mm
Spindeldrehzahl: 0 - 630 ...

The machine is in good technical condition, under power, after agreement is possible to test it.

Details:
Max. Schleifdurchmesser: 250 mm
Max. Schleiflänge: 1500 mm

The machine is in a good technical condition. Under power. It can be tested.

Details:
Steuerung Siemens: Sinumerik 828 D BASIC
Aufspanntischfläche: 830x410 mm
X Weg: ...

Good technical condition, demounted. Siemens 840 D control system.

Details:
X Weg: 12000 mm
Y Weg: 5300 mm
Z Weg: 4000 mm
Hauptmotorleistung: 100 kW

Machine was working last time, now is disconnected.very good for modernization.
2 big luntes included.

Details:
Drehdurchmesser über Bett: 2000 mm
Spitzenweite: 8000 ...

The machine is in good technical condition, not under power, after agreement is possible to test it.

Details:
Steuerung Haas:
Drehdurchmesser: 241 mm
Drehlänge: 508 ...

The machine is in good technical condition and can be tested.

Details:
Max. Blechdicke: 22 mm
Blechbreite: 3000 mm
Anzahl von Biegezylindern: 3
Antriebsart: ...

Machine in good technical condition, working, by prior agreement the possibility of inspection.

Details:
Aufspanntischfläche: 1029x508 mm
X Weg: 762 mm
Y Weg: 508 mm

Machine in very good condition, not under power, overhauled in 2017, automatic speed change 1:1 ; 1:3 ; 1:9, hydraulics components ATOS Italy, greasing system AZETA Italy, digital measurements 2+2 ...

The machine is after modernisation, ready to be installed, incl. modern
safety covers, tool cooling, pump tank with filter and chip conveyor, CE.
Controm system Siemens 840D controls the X ...

This is a new machine. The device is equipped with a control system, two handed
control, the controller of choice for two people. When ordering, it is possible
to define additional ...

Machine is new, never used, connected and can be tested.

Details:
Steuerung Fanuc: 0i Mate - MD
Drehdurchmesser: mm
Drehlänge: 600 mm
Schrägbett: nein

The machine is in excellent condition. After agreement possible to test it under power.

Details:
Steuerung Durma: DT-10
Max. Schnittlänge: 3080 mm
Max. Blechdicke: 6 ...

Details:
Steuerung Fanuc: Fanuc 31i
Aufspanntischfläche: 1000x800 mm
X Weg: 1700 mm
Y Weg: 1250 mm
Z Weg: 1800 mm
Spindeldrehzahl: 1 - 6000 /min.

Details:
Presskraft: 500 t
Die Abmessungen des Desktop: 2498 x 950 mm
Stößelhub: 315 mm
Hubanzahl: 20 /min
Stößelverstellung: 130 mm
Einbauhohe: ...

The machine is in good technical condition possibile to test on power.

Details:
Presskraft: 25 t
Die Abmessungen des Desktop: 560x450 mm
Stößelhub: 8-85 mm

The machine is in good technical condition and can be tested.

Details:
Steuerung NCT: 104
Die Abmessungen des Desktop: 3100x1000 mm
X Weg: 3000 mm
Y Weg: 1200 ...

Details:
Steueurung Mefi : CNC 859
Max. Werkstückdurchmesser: 160 mm
Modul: 4 -
Maschinenabmessungen L x B x H: 3012 x 2650 x 1995 mm
Maschinengewicht: ...

Overhaul in 2010
The machine is disconnected.

Details:
Steuerung Siemens: Simatic S7-300
Max. Werkstückdurchmesser: 65 mm
Größte Durchmesser des geschliffenes ...

The machine is in excellent technical condition, little used (cutting time 6500 hours), can be tested. SPW (Smart Pulse Wire Control) - SPWA 600 T.
JUMBO feeder

Details:
X ...

Very good technical condition, can be tested. Accessories: bar feeder (Top Barfeeder), tool holders (for driven tools too), chip conveyor, workpiece catcher.

Details:
Steuerung ...

The machine is in very good technical condition, can be tested. Accessories: tools approx. 40 pcs.

Details:
Arbeitsflaeche: 2530x1270 mm
Presskraft: 25 t
X Weg: 2584 ...

The machine is in good technical condition, under power, after agreement is possible to test it.

Details:
Steuerung Fanuc: 0i Mate - MD
Schrägbett: ja
Spindelbohrung: ...

The machine is in a good technical condition. Under power. It can be tested.

Details:
Steuerung STYLE:
Die Abmessungen des Desktop: 1520x510 mm
X Weg: 1320 mm
Y ...

The machine is in very good condition, only 700 work hours. Under power possible to be tested .
Right angle milling head-two positions: horizontal and vertical position, positioning by ...

The machine is in good technical condition and can be tested.

Details:
Max. Durchmesser des geschnittenen Materials: 550 mm
Hauptmotorleistung: 4 kW
Maschinenabmessungen ...

Vertikal Bandsäge PEHAKA Typ SM 4
Fabr. Nr. 27060 Baujahr ca. 1980
Ausladung 380 mm
Tischgröße 620 x 480 mm
Schnitthöhe 250 mm
Rollendurchmesser 400 mm

Details
x-Weg:450 mm
y-Weg:320 mm
z-Weg:450 mm
Tischgröße:950 x 300 mm
Spindeldrehzahlen:39-2320 U/min
Spindelaufnahme:SK 40
Antriebsleistung - ...

x-Weg 0 mm
y-Weg 0 mm
z-Weg mm
Gesamtleistungsbedarf kW
Maschinengewicht ca. t
Raumbedarf ca. m
Markiermaschine mit Rundtisch, (Kegelräder), 4 Achsen, PV ...

Werkstückdurchmesser 8-125 mm
Schleiftiefe 130 mm
Einspannlänge 50-1100 mm
Werkstückdurchmesser - max. 0 mm
Werkstückdurchmesser - min. 0 mm
Werkstücklänge ...

Druck 125 t
Ständerweite 1050 mm
Hub 250 mm
Gesamtleistungsbedarf 40 kW
Maschinengewicht ca. 8,5 t
Raumbedarf ca. m
DUNKES CNC-Steuerung Type CNC 1000, ...

Druck 500 t
Durchgangsbreite 750 mm
Hub 120 mm
Gesamtleistungsbedarf 57 kW
Maschinengewicht ca. 16 t
Raumbedarf ca. m
SIEMENS Siematic-Steuerung S 7, stfl. ...

Nutenbreite 50 mm
Ziehlänge 320 mm
Arbeitsgeschwindigkeit m/min
Druckleistung 3 t
Arbeitslänge 320 mm
Arbeitsbreite 30 mm
Kapazität 3

Drehdurchmesser 1250 mm
Umlaufdurchmesser 1160 mm
Drehhöhe 800 mm
Planscheibendurchmesser 1000 mm
Gesamtleistungsbedarf 97 kW
Maschinengewicht ca. 25000 t

Raddurchmesser - max. 80 mm
Radbreite 150 mm
Modul - max. 2,5
Modul - min.
Gesamtleistungsbedarf 10 kW
Maschinengewicht ca. 2400 kg
Vollautomatische ...

x-Weg 800 mm
y-Weg 400 mm
z-Weg 350 mm
Gesamtleistungsbedarf 40 kW
Maschinengewicht ca. 8 t
Raumbedarf ca. m
CNC-gesteuertes vertikales Bearbeitungszentrum für ...

x-Weg 800 mm
y-Weg 500 mm
z-Weg 510 mm
Gesamtleistungsbedarf 60 kW
Maschinengewicht ca. 10 t
Raumbedarf ca. m
CNC-gesteuertes vertikales Bearbeitungszentrum für ...

x-Weg 800 mm
y-Weg 500 mm
z-Weg 510 mm
Gesamtleistungsbedarf 60 kW
Maschinengewicht ca. 10 t
Raumbedarf ca. m
CNC-gesteuertes vertikales Bearbeitungszentrum für ...